CivilTech Studio
PricingBlog
CivilTech Studio
PricingBlog

CivilTech Studio blog

Posts tagged #geotechnical

Geotechnical engineering for foundations: bearing capacity from SPT N values, settlement and liquefaction checks.

Write a post
Concrete StructuresGeotechnical & FoundationsWater & EnvironmentSite, Loads & QACompliance & Approvals
All#is-456#site-engineering#rcc#bbs#reinforcement#rcc-design
More tags
#quantity-estimation#detailing#punching-shear#structural-analysis#is-3370#retaining-wall#quality-control#foundation-design#geotechnical
Sort:LatestMost readQuick reads2 posts
Cover image for SBC from SPT N Value (IS 6403) — Worked Example

#geotechnical#spt#bearing-capacity

SBC from SPT N Value (IS 6403) — Worked Example

How to find safe bearing capacity from SPT N value: N corrections, the IS 6403 shear check, Meyerhof, Bowles and Burland & Burbidge settlement methods, water table effects and IS 1893 liquefaction screening, with a full worked example.

15 Oct 202620 min read

Cover image for Retaining Wall Design (IS 456) — Cantilever Example

#retaining-wall

Share your site experience

Write about a design problem you solved or a lesson from site. We review every post and publish the ones we approve.

Write a post
CivilTech Studio
ModulesFree toolsPricingDocsBlogWhat's newTermsPrivacy
Built for structural engineers
#homeowners
#is-456
#cantilever-wall

Retaining Wall Design (IS 456) — Cantilever Example

A complete retaining wall design calculation for a 4.0 m cantilever RC wall to IS 456: earth pressure, overturning, sliding (cl. 20.1/20.2), base pressure, stem, heel and toe steel, with every number checked by hand and by the CivilTech Studio engine.

15 Oct 202621 min read