CivilTech Studio
PricingBlog
CivilTech Studio
PricingBlog

CivilTech Studio blog

Posts tagged #foundation-design

Foundation design guides: footing size from bearing capacity, one-way and punching shear, reinforcement and anchorage.

Write a post
Concrete StructuresGeotechnical & FoundationsWater & EnvironmentSite, Loads & QACompliance & Approvals
All#is-456#site-engineering#rcc#bbs#reinforcement#rcc-design
More tags
#quantity-estimation#detailing#punching-shear#structural-analysis#is-3370#retaining-wall#quality-control#foundation-design#geotechnical
Sort:LatestMost readQuick reads2 posts
Cover image for Isolated Footing Design (IS 456) — Worked Example

#is-456#footing-design#isolated-footing

Isolated Footing Design (IS 456) — Worked Example

Isolated footing design IS 456 guide, step by step: plan size from net SBC, depth from one-way shear, punching and dowel anchorage, steel by Annex G. A full worked example for a 900 kN column, hand-checked against the CivilTech Studio engine.

15 Oct 202621 min read

Cover image for SBC from SPT N Value (IS 6403) — Worked Example

Share your site experience

Write about a design problem you solved or a lesson from site. We review every post and publish the ones we approve.

Write a post
CivilTech Studio
ModulesFree toolsPricingDocsBlogWhat's newTermsPrivacy
Built for structural engineers
#homeowners
#geotechnical
#spt
#bearing-capacity

SBC from SPT N Value (IS 6403) — Worked Example

How to find safe bearing capacity from SPT N value: N corrections, the IS 6403 shear check, Meyerhof, Bowles and Burland & Burbidge settlement methods, water table effects and IS 1893 liquefaction screening, with a full worked example.

15 Oct 202620 min read